定義：超聲波清洗器是利用超聲波在水中振蕩產生“空化效應”進行清洗的設備。是精密器械清洗最常用的洗凈技術。

　　Definition: Ultrasonic cleaner is a device that uses ultrasonic waves to oscillate in water and generate a "cavitation effect" for cleaning. It is the most commonly used cleaning technique for precision instruments.

　　使用范圍：手術器械：如敷料鑷、血管鉗、精細器械等。

　　Scope of use: Surgical instruments such as dressing forceps, vascular forceps, fine instruments, etc.

　　超聲波是一種聲波，頻率單位是赫茲（Hz），常用頻率如：骨科器械（20、28、30KHz）普通器械（中頻：40 KHz、45 KHz以上）精密器械（高頻：80 KHz、100 KHz以上）

　　Ultrasonic waves are a type of sound wave with a frequency unit of Hertz (Hz). Commonly used frequencies include orthopedic instruments (20, 28, 30KHz), ordinary instruments (intermediate frequency: 40 KHz, 45 KHz or above), and precision instruments (high frequency: 80 KHz, 100 KHz or above)

　　低頻率超聲：超聲頻率越低，空化效應越大，摩擦力就越強，噪聲越大。高頻率超聲：

　　Low frequency ultrasound: The lower the ultrasound frequency, the greater the cavitation effect, the stronger the friction force, and the louder the noise. High frequency ultrasound:

　　超聲頻率越高，空化效應越小，摩擦力就越弱，噪聲越小。

　　The higher the ultrasonic frequency, the smaller the cavitation effect, the weaker the friction force, and the lower the noise.

　　超聲波三頻率轉換清洗時間設定

　　Ultrasonic three frequency conversion cleaning time setting

　　如清洗普通器械：清洗時間設定10分鐘（如止血鉗、鈦夾鉗等）

　　For cleaning ordinary instruments: set the cleaning time to 10 minutes (such as hemostatic forceps, titanium clamps, etc.)

　　三種超聲頻率轉換：45KHz為8分鐘，48秒轉換一次，10次為8分鐘。80KHz為1分鐘，6秒轉換一次，10次為1分鐘。100KHz為1分鐘，6秒轉換一次，10次為一分鐘。

　　Three types of ultrasound frequency conversion: 45KHz for 8 minutes, conversion once every 48 seconds, and 10 times for 8 minutes. 80KHz is 1 minute, converted every 6 seconds, and 10 times is 1 minute. 100KHz is 1 minute, converted every 6 seconds, and 10 times is 1 minute.

　　超聲波清洗器的優點清洗速度快、效率高清洗均勻性好可清洗盲孔、管腔類器械

　　The advantages of ultrasonic cleaner are fast cleaning speed, high efficiency, good cleaning uniformity, and the ability to clean blind holes and luminal instruments

　　超聲波清洗器的缺點

　　Disadvantages of ultrasonic cleaner

　　破壞性清洗，對器械表面有損傷無流動性，需要其他清洗方式輔助

　　Destructive cleaning, causing damage to the surface of the instrument without fluidity, requiring other cleaning methods to assist

　　本文由 超聲波清洗機   友情奉獻.更多有關的知識請點擊  http://www.best80.cn/   真誠的態度.為您提供為全面的服務.更多有關的知識我們將會陸續向大家奉獻.敬請期待.

　　This article is a friendly contribution from an ultrasonic cleaning machine For more related knowledge, please click http://www.best80.cn/ Sincere attitude To provide you with comprehensive services We will gradually contribute more relevant knowledge to everyone Coming soon.