實驗室一直被視為一個嚴謹而嚴肅的場所，實驗應遵循一定的步驟，使用的設備也經歷了詳細的選擇，如實驗室超聲波清洗機，其特點遠強于一般類型的清洗機。專門負責采購的實驗室人員一般對服務的實驗室超聲波清洗機印象深刻，如何正確維護將從以下幾個方面開始。
The laboratory has always been regarded as a rigorous and serious place. The experiment should follow certain steps, and the equipment used has also undergone detailed selection, such as the ultrasonic cleaning machine in the laboratory, which is much stronger than the general type of cleaning machine. The laboratory personnel specially responsible for purchasing are generally impressed with the laboratory ultrasonic cleaning machine, and how to properly maintain it will start from the following aspects.
1.將清洗機放在避免細菌侵襲的地方
1. Put the washing machine in a place where bacteria can be avoided
良好的服務和誠實的實驗室超聲波清洗器可以從結構和引進的原材料兩個方面驗證買家的高質量水平。即使確認了這一點，也需要及時將實驗室超聲波清洗器放在避免細菌侵襲的地方。雖然該設備可以自行清洗，但也會受到壞細菌的嚴重侵襲。
Good service and honest laboratory ultrasonic cleaner can verify the buyer's high quality level from both the structure and the imported raw materials. Even if this is confirmed, it is also necessary to place the laboratory ultrasonic cleaner in a place where bacteria can be prevented from invading. Although the equipment can be cleaned by itself, it will also be seriously attacked by bad bacteria.

2.及時清理清洗后留下的頑固污漬
2. Timely clean the stubborn stains left after cleaning
每次使用實驗室超聲波清洗機后，應及時進入清洗階段，不小心去除表面滴落的液體和污漬，以免延誤清洗機的正常使用。一旦頑固污漬與清洗機長期粘附，可能導致油漆脫落等問題，影響清洗機的正常效用。
After using the ultrasonic cleaner in the laboratory every time, it should enter the cleaning stage in time to remove the liquid and dirt dripping from the surface carelessly, so as not to delay the normal use of the cleaner. Once stubborn stains adhere to the cleaner for a long time, it may lead to paint peeling and other problems, affecting the normal effectiveness of the cleaner.
3.定期檢查清洗機的關鍵部件
3. Regularly check the key parts of the washer
無論實驗室超聲波清洗器的質量如何，都應根據定期檢查的方法觀察關鍵部件的運行情況。正是有了這些部件，清洗功能才能順利運行。如果零件維護不當，清洗機內外會出現不同水平的問題，甚至出現大故障。
Regardless of the quality of ultrasonic cleaners in the laboratory, the operation of key components should be observed according to the method of regular inspection. It is with these components that the cleaning function can run smoothly. If the parts are not properly maintained, problems of different levels will occur inside and outside the washer, even major failures.
以上從三個角度介紹了維修實驗室超聲波清洗機的操作過程，以及應落實到位的幾個關鍵點。只有把這些部分付諸行動，清洗機的運行才能得到多方位的維護。希望實驗室采購人員能意識到這一點，不能忽視未來的維護工作。
The above introduces the operation process of the ultrasonic cleaning machine in the maintenance laboratory from three angles, as well as several key points that should be implemented in place. Only by putting these parts into action, can the operation of the cleaning machine be maintained in multiple directions. It is hoped that the laboratory procurement personnel can realize this and can not ignore the future maintenance work.
以上就是為大家介紹的有關超聲波清洗設備的詳細的介紹,希望對您有所幫助.如果您有什么疑問的話,歡迎聯系我們.我們將以的態度,為您提供服務http://www.best80.cn
The above is a detailed introduction to the ultrasonic cleaning equipment, and we hope it will be helpful to you. If you have any questions, please contact us. We will provide you with professional services http://www.best80.cn