服務熱線電話
400-6188-756
碳氫清洗設備環境對于環境的使用要求!
來源:http://www.best80.cn/ 時間: 2022-12-03 瀏覽次數: 0
1.使用溫度不得超過40。
1. The operating temperature shall not exceed 40.
2.設備周圍濕度75%,不能太干。
2. The humidity around the equipment shall be 75%, and it shall not be too dry.
3.保持清潔室的空氣流通。(如果沒有空氣流通,通風系統每小時2萬立方米以上)
3. Keep the clean room ventilated. (If there is no air circulation, the ventilation system is more than 20000 cubic meters per hour)
4.碳氫化合物清洗機設備的排氣系統需要與室外連接。(排氣系統每小時2200立方米)
4. The exhaust system of hydrocarbon washer equipment needs to be connected to the outdoor. (2200 m3/h for exhaust system)
5.防爆照明燈應設置在設備布置范圍內5.防爆電器。


5. Explosion proof lamps shall be set within the equipment layout. 5. Explosion proof electrical appliances.
6.設備嚴禁在陽光下爆炸,以免溫度升高,造成安全危險。
6. It is strictly forbidden to explode the equipment in the sun to avoid the safety hazard caused by temperature rise.
7.嚴禁在設備周圍5米內燃放煙花.引火作業及粉塵。
7. Fireworks, ignition and dust are prohibited within 5 meters around the equipment.
8.用戶應直接離設備1(1)直接安裝電源(設備電源箱).空氣保護開關安裝在距離地面1.6米以上的地方。(設備檢修時切斷電源方便使用)如果有專門的主電源柜,現場必須距離設備5米。
8. The user shall directly install the power supply (equipment power box) 1 (1) away from the equipment. The air protection switch shall be installed 1.6 meters above the ground. (Cut off the power supply for easy use during equipment maintenance) If there is a special main power cabinet, the site must be 5 meters away from the equipment.
9.冷水機組應設置在清洗設備旁邊3-5米之間,并安裝排氣管裝置。(排氣量為每小時2萬立方米)
9. The chiller shall be set 3-5 meters away from the cleaning equipment, and the exhaust pipe device shall be installed. (The air displacement is 20000 cubic meters per hour)
相關文章
-
真空碳氫清洗機清洗金屬波紋管路非常環保、潔凈度高、清洗高效 2026-01-10
-
解決異形件清洗難題——通過式噴淋清洗機的實用價值 2026-01-05
-
PCBA生產好幫手——噴淋清洗機的核心價值解析 2025-12-31
-
別忽視!工業超聲波清洗機的循環過濾功能,才是清潔與省錢的關鍵 2025-12-30
-
微鉆冶具清洗難題?這款環保零排放超聲波清洗機精準破解 2025-12-27
-
船舶維護重油污難題?這款超聲波清洗機成老板必備神器 2025-12-26
-
工件油污難清理?全自動超聲波清洗機:全方位無死角,高效省力解難題 2025-12-25
-
超聲波清洗機的換能器怎么用?核心是頻率匹配+場景適配 2025-12-24
-
CNC 高壓清洗機:高效清除壓鑄模具殘留物,精準洗凈精密零件 2025-12-23
-
工業清洗怕慢怕殘留?多槽手動超聲波清洗機全搞定! 2025-12-23

新聞中心




行業新聞







魯公網安備37011202000628號